Description & Key Features
UISP Fiber XGS-PON CPE
Features:
(1) XGS-PON optic SC/APC port
(1) 10GbE RJ45 LAN port
Bridge and Router Mode support
Managed with the UISP application: Version 1.4.9 and later
Technical Specifications
Mechanica...
Používame najnovšie technológie zabezpečenia obchodu, platieb a ochrany Vašich dát.
Tovar pochádza LEN od oficiálnych SK distribútorov!
To je zárukou lokalizácie a bezproblémovej reklamácie.
Garantujeme možnosť vrátenia tovaru nad rámec zákona.
Description & Key Features
UISP Fiber XGS-PON CPE
Features:
(1) XGS-PON optic SC/APC port
(1) 10GbE RJ45 LAN port
Bridge and Router Mode support
Managed with the UISP application: Version 1.4.9 and later
Technical Specifications
Mechanical
Dimensions 100 x 100 x 27 mm (3.9 x 3.9 x 1.1")
Weight 220 g (0.49 lb)
Enclosure material UV-stabilized polycarbonate
Hardware
Networking interface (1) SC/APC, ITU-G.9807 XGSPON WAN port
(1) 100/1,000/2,500/5,000/10,000 MbE RJ45 LAN ports
Management interface Ethernet in-band
PON
Memory 256 MB DDR
Onboard flash storage 32 MB NOR
Max. power consumption 8W
Power method USB-C 5V DC, 3A
Power supply 5V DC, 3A power adapter
Supported voltage range 5V DC power adapter
Total non-blocking line rate Downstream: 9.95 Gbit/s
Upstream: 9.95 Gbit/s
Normal TX range of optical module 4 to 9dBm
Normal RX range of optical module -9 to -26dBm
Button (1) Factory reset
Operating temperature -15 to 45° C (5 to 113° F)
Operating humidity 10 to 95% non-condensing
Certifications CE, FCC, IC
Fiber
Operating wavelength TX: 1,270nm
RX: 1,577nm
Line code Scrambled NRZ
Physical reach 20 km
LEDs
Power White: ON
Ethernet Steady white: link up
Blinking white: activity
OFF: link down
PON status (3) signal LEDs
All-OFF: bootup
1x orange: signal too low (< -27 dbm)
1x white: signal low (>= -27 dbm)
2x white: signal good (>= -24 dbm)
3x white: signal strong (>= -12 dbm)
1x orange + 2x white: signal too strong (>= -9 dbm)
3x orange: no signal
LEDs alternate between orange + white + orange and a signal strength indicator: no authority
Software
Management application UISP: Version 1.5.7 and later
Description & Key Features
UISP Fiber XG-PON CPE
Features:
(1) XG-PON optic SC/APC port
(1) 2.5GbE RJ45 LAN port that supports 24V passive PoE
Bridge and Router Mode support
Note: This device is only compatible with the UISP Fiber XGS OLT....
Fiber XGS/XG/G-PON OLT
Features:
(8) 10G SFP+ OLT ports
(4) 25G SFP28 uplink ports
(2) Hot-swappable power supply ports
Managed with the UISP application: Version 1.5.7 and later
Technical Specifications
Mechanical
Dimensions 442.4 x 285....
Ubiquiti UISP Fiber XGOptická síťová jednotka, která dokáže zajistit přenosovou rychlost až 10 Gb/s pro downlink (2,5 Gb/s pro uplink) na vzdálenost až 20 km....
Wi-Fi 6 Access Point with dual-band 2x2 MIMO in a compact design for low-profile mounting.Technical SpecificationsMechanicalDimensions O160 x 33 mm (O6.3 x 1.3")Weight Without mount: 338 g (0.75 lb)With mount: 41...