The GPS receiver with u-blox 6 SuperSence® chipset can receive WAAS and EGNOS data besides GPS. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-622MP GPS receiver is especially designed...
Používame najnovšie technológie zabezpečenia obchodu, platieb a ochrany Vašich dát.
Tovar pochádza LEN od oficiálnych SK distribútorov!
To je zárukou lokalizácie a bezproblémovej reklamácie.
Garantujeme možnosť vrátenia tovaru nad rámec zákona.
The GPS receiver with u-blox 6 SuperSence® chipset can receive WAAS and EGNOS data besides GPS. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-622MP GPS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.
Specifikace • u-blox 6 GPS SuperSense® high performance chipset • GPS receiver with MD6 Navilock plug (USB or serial cable are optional available) • Internal patch antenna • Central fastening screw thread with cable leading from the middle • Frequency: L1, 1575.42 MHz, C/A Code: 1.023 MHz • Accepts the signals of up to 50 satellites at the same time • Supports AssistNow Offline (14 days Almanac data) • Supports AGPS, WAAS, EGNOS and MSAS • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG • Baud Rate up to 115200 • UP-DATE Rate: up to 5 Hz • Sensibility max. –162 dBm • Water-proof housing (IPX7) • Operating temperature: -20 °C to +60 °C • Cold start in about 25 sec. • Hot start in about 1 sec. • Cable length: 5 m • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS • Dimension: 62 mm x 21 mm
Systémové požadavky • Linux ex Kernel 2.6, Mac, Windows 98SE/ME/2000/XP/Vista/7/8, Windows Mobile 2003/5/6, Android ex V2.1 • MD6 connection cable
Obsah balení • NL-622MP Empfänger • Befestigungsmaterial • CD ROM
Balení • Kartonová krabice
Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.
This USB Type-C™ 2.0 to TTL converter by Delock can be connected directly to GPIO (General purpose input/output) connectors or UART (Universal Asynchronous Receiver/Transmitter) interfaces. The converter is suitable for applications on s...
This USB Type-C™ 2.0 to TTL converter by Delock can be connected directly to GPIO (General purpose input/output) connectors or UART (Universal Asynchronous Receiver/Transmitter) interfaces. The converter is suitable for applications on s...
This USB 2.0 Type-A to serial RS-232 adapter cable by Delock is suitable as a connection cable between a device with USB 2.0 and a device with RS-232 port. With the tinned open cable ends, the connection can be made directly to the RS-232 d...
PopisThis USB 2.0 Type-A to serial RS-232 adapter cable by Delock is suitable as a connection cable between a device with USB 2.0 and a device with RS-232 port. With the tinned open cable ends, the connection can be made directly to the...